Threading

Powerful, easy-to-operate electric tool for threading with unique support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Pipe threads 1/8-3/4", 16-32 mm.

REMS Mini-Amigo - the smallest and lightest. Only 2.7 kg. Only 27 cm long.  

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Pipe threads 1/8-11/4", 16-40 mm. Bolt threads 6-30 mm, 1/4-1".

REMS Amigo - the smallest, lightest, strongest and fastest up to 1 1/4".

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Pipe threads 1/8-2", 16-50 mm. Bolt threads 6-30 mm, 1/4-1". Pipe threads with REMS 4" automatic die head 2 1/2-4".

REMS Amigo 2 - extremely strong up to 2".

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Pipe threads 1/8-2", 16-50 mm. Bolt threads 6-30 mm, 1/4-1".

REMS Amigo 2 Compact - the smallest and lightest up to 2".

For cutting pipe threads in hard-to-reach areas, e.g. caved wall, lay bare pipes, trench. Ideal for repair and renovation.

Pipe threads 3/8-11/4"

REMS quick-change die heads S - the trouble shooter for hard-to-reach areas. 

Attachment heads for button dies
Attachment heads for incorporating standard, round button dies of all thread types. Locking of button dies to the attachment head with stud bolt.

Intermediate rings
Intermediate rings for different outside diameters of button dies.

Guide bushings
Guide bushings for easy and concentric start-cutting.

Proven high performance machine for threading, cutting, deburring, threading of nipples, roll grooving. For installation, metalworking, industry. For job site and workshop.

Pipe threads 1/16-2", 16-63 mm. Bolt threads 6-60 mm, 1/4-2". Pipe threads with REMS 4" automatic die head 21/2-4". Also capable of threading plastic covered pipes. Pipe grooving with REMS roll grooving attachment DN 25-200 (300) 1-8" (12").

REMS Tornado - a class of ist own.
Automatic chuck. Universal automatic die head. Automatic lubrication and cooling.

Robust, compact high performance machine for threading, cutting, deburring, threading of nipples, roll grooving. For installation, metalworking, industry. For job site and workshop.

Pipe threads 1/16-2", 16-63 mm. Bolt threads 6-60 mm, 1/4-2". Pipe threads with REMS 4" automatic die head 21/2-4". Also capable of threading plastic covered pipes. Pipe grooving with REMS roll grooving attachment DN 25-200 (300) 1-8" (12").

REMS Magnum - the compact up to 2".

Robust, compact high performance machine for threading, cutting, deburring, threading of nipples, roll grooving. For installation, metalworking, industry. For job site and workshop.

Pipe threads 1/4-4", 16-63 mm. Bolt threads 14-60 mm, 1/2-2". Also capable of threading plastic covered pipes. Pipe grooving with REMS roll grooving attachment DN 25-200 (300) 1-8" (12").

REMS Magnum - the super machine up to 4".
Exceptionally round and clean threads up to 4" by using 6 threading dies.  

Robust, compact threading attachment for efficient threading of tapered pipe threads, nipple threading. Pipe threads 21/2-4"

REMS 4" automatic die head - excellent threads up to 4" thanks to 5 threading dies and stepless automatically opening die head. No time consuming reverse.

Semi-automatic high-performance machine for efficient cutting of bolt and pipe threads. For industry, metal working, installation.

Bolt threads 6-72 mm 1/4-2 3/4". Pipe threads 1/16-21/2", 16-63 mm. Tolerance class corresponding to DIN 13 „mediuml" (6 g). Thread length up to Ø 30 mm unlimited, up to Ø 72 mm 200 mm. Chamfering range 7-78 mm. Chamfered Ø 7 mm. Maximum chamfer 7 mm. Chamfer angle 45°. Curling range 7-78 mm. Curled Ø from 7 mm. Curled Ø up to 63 mm.

REMS Unimat 75 - high efficiency.
Tangential-chaser-threading-system. Large threading range. Fast working, short resetting time. For single and series production. Low hourly rate for the machine. Simple operation. Relieves expensive turning machines and specialists.

Chasers and holders ( threading sets)
The proven regrindable REMS tangential chasers with precise cutting geometry ensure an excellent start-cutting performance and clean threads. Tool steel chasers made of special hardened steel for material up to 500 N/mm². HSS chasers for hard-to-machine material above 500 N/mm². The chasers sit in a special holder system. Chasers and holders together form a threading set.

Chasers
The proven regrindable REMS tangential chasers with precise cutting geometry ensure an excellent start-cutting performance and clean threads. Tool steel chasers made of special hardened steel for material up to 500 N/mm². HSS chasers for hard-to-machine material above 500 N/mm².

Semi-automatic high-performance machine for efficient cutting of pipe threads. For industry, metal working, installation.

Pipe threads 1/4-4". Thread length up to 120 mm. Chamfering range 7-115 mm. Chamfered Ø from 7 mm. Maximum chamfer 7 mm. Chamfer angle 45°.

REMS Unimat 77 - pipe threads up to 4".
Tangential-chaser-threading-system. Fast working, short resetting time. For single and series production.

Manual pipe nipple chuck for internal clamping of short pipe pieces. For universal use.

Nipples and double nipples in standard and special lengths 3/8-2".

REMS Nippelspanner - make nipples yourself.
Any length. Anywhere.

Automatic pipe nipple chuck for internal clamping of short pipe pieces.

Nipples and double nipples in standard and special lengths 1/2-4".

REMS Nippelfix - efficient nipple threading up to 4".
Any length. Anywhere. Automatic internal clamping. Super fast and simple.

REMS Spezial - high-alloyed mineral based thread-cutting oil, can be washed out with water. High lubricating and cooling effect.

High-alloyed mineral based thread-cutting oil. For all materials: steel, stainless steel, non-ferrous metal, plastic. For drinking water supplies, comply with local regulations! In AUT, CHE, DEU, DNK not permitted for drinking water supplies.

REMS Sanitol - mineral oil free. Completely water soluable. High lubricating and cooling effect.

Synthetic, mineral oil free thread-cutting oil. Specially for drinking water supplies. Also for universal use. For all materials.

Threading